Allegheny Technologies Announces Full Year and Fourth Quarter 2008 Results

PITTSBURGH January 21, 2009: Allegheny Technologies Incorporated reported net income for the fourth quarter 2008 of $110.9 million, or $1.15 per share, on sales of $1.11 billion.

In the fourth quarter 2007, ATI reported net income of $148.9 million, or $1.45 per share, on sales of $1.27 billion.

For the full year 2008, net income was $565.9 million, or $5.67 per share, on sales of $5.31 billion. For the full year 2007, net income was $747.1 million, or $7.26 per share, on sales of $5.45 billion.

“2008 was the second best year for sales and earnings per share in the history of ATI. This was accomplished even with supply chain disruptions and schedule push outs in the aerospace market and an unprecedented fall in demand from many of our other markets during the fourth quarter,” said L. Patrick Hassey, Chairman, President and Chief Executive Officer.

“Our 2008 results reflect ATI’s transformation into a globally focused, diversified high-value specialty metals company with strong cash flow and liquidity, and a solid balance sheet. Shipments of ATI’s total titanium products reached over 47 million pounds, an increase of approximately 15% over 2007. Shipments of our grain-oriented electrical steel increased 9% and shipments of our exotic alloys increased 6%, both compared to 2007 shipments. Direct international sales were 28% of sales. Through our ATI Business System, we maintained our world-class safety performance and achieved over $134 million of gross cost reductions.

“Key financial metrics were strong during the year. Return on capital employed was 21.8% and return on stockholders’ equity was 27%.

“ATI’s financial position remains strong. At the end of 2008, we had $470 million of cash, no borrowings under our $400 million domestic credit facility, no significant near-term debt maturities, and net debt to total capitalization of 2%. This strong financial position is after self-funded capital investments in 2008 of $516 million and over $278 million in share repurchases. We also made a $65 million voluntary contribution to our U.S. defined benefit pension plan during the fourth quarter 2008, which consisted of $30 million of cash and 1.5 million shares of ATI common stock.

“The combination of the continuing credit crisis and the global recession has resulted in challenging conditions in many of our markets. We currently have limited short-term visibility. We have taken actions to adjust our production schedules, preserve cash and maintain our liquidity, ratchet up our cost reductions, and continue the transformation of ATI. To help ensure that ATI remains solidly profitable in 2009, we have contingency plans ready to be implemented should our markets not stabilize and business conditions deteriorate further.

“We currently expect 2009 capital expenditures of approximately $450 million. We are committed to continuing to self-fund these projects and can further adjust the timing of any project if necessary. We have targeted a minimum of $150 million in new gross cost reductions in 2009. We are focused on improving inventory turns in order to limit the amount of cash used in managed working capital, as well as to limit our exposure to volatile raw material costs.

“Primarily as a result of the historic negative returns in equity and fixed income markets in 2008, we expect 2009 pretax retirement benefit expense, which includes pension and other post retirement benefits, of approximately $140 million, or nearly $35 million per quarter. This represents an increase of nearly $132 million compared to 2008.

“We expect 2009 to be challenging. We believe that weak demand from many of our end markets will continue through the first half. In addition, we expect first quarter income before tax to be negatively impacted by a raw materials/surcharge mismatch of nearly $70 million. Most of this will impact the Flat-Rolled Products segment and results from the unprecedented drop in raw material costs over the last three months of 2008. We do not believe that this issue will have a significant impact beyond the first quarter. As a result of the challenging economy, the expected significant increase in retirement benefit expense, and the raw materials/surcharge mismatch, we expect first quarter 2009 results to be at or near breakeven.

“The aerospace and defense and global infrastructure markets, namely chemical process industry, oil and gas, electrical energy, and medical, have been driving our performance for the last several years. These markets accounted for over 70% of ATI sales in 2008. We continue to believe that these markets have strong growth potential over the intermediate and long-term. We intend to use these difficult market conditions to continue to positively differentiate ATI as a uniquely positioned, diversified, technology-driven global specialty metals producer.”

	�	�	�	�							�
					Three Months Ended									Year Ended
					December 31									December 31
					In Millions
					2008		�	�	2007		�	�	�	2008	�	�	2007
																	�
Sales					$	1,112.7			$	1,273.6				$ 5,309.7			$	5,452.5
																	�
Net income					$	110.9			$	148.9				$ 565.9			$	747.1
																	�
					Per Diluted Share
																	�
Net income					$	1.15			$	1.45				$ 5.67			$	7.26
																		�

Full Year and Fourth Quarter 2008 Financial Highlights

Sales for the full year 2008 were $5.31 billion, 2.6% lower than 2007. Direct international sales increased to $1.49 billion and represented 28% of total sales. Compared to the full year 2007, sales decreased 6% in the High Performance Metals segment, and 1% in the Flat-Rolled Products segment, and increased 5% in the Engineered Products segment. For the fourth quarter 2008, sales decreased to $1.11 billion, 12.6% lower than the fourth quarter 2007. Compared to the fourth quarter 2007, sales declined 12% in the High Performance Metals segment, 14% in the Flat-Rolled Products segment and 7% in the Engineered Products segment.
Full year 2008 segment operating profit was $937.3 million, or 17.7% of sales, a decrease of $329.1 million compared to 2007 as a result of lower profitability across all business segments.
Fourth quarter 2008 segment operating profit was $177.5 million, a decrease of $66.9 million, or 27%, compared to the fourth quarter 2007, as a result of declines in profitability in the High Performance Metals and Engineered Products business segments partially offset by improved profitability in the Flat-Rolled Products segment.
Net income for the full year 2008 was $565.9 million, or $5.67 per share, compared to $747.1 million, or $7.26 per share for 2007. For the fourth quarter 2008, net income was $110.9 million, or $1.15 per share, compared to $148.9 million, or $1.45 per share, in the fourth quarter 2007.
Cash flow from operations was $754.5 million for the 2008 year.
Capital expenditures totaled $515.7 million for the full year 2008, including $150.6 million in the fourth quarter 2008. Over the past four years, we have self-funded $1.3 billion in capital expenditures to enhance and expand our manufacturing capabilities.
Cash on hand was $469.9 million at the end of 2008, an increase of $197.3 million from September 30, 2008.
Gross cost reductions, before the effects of inflation, totaled $30.4 million for the fourth quarter 2008 and $134.2 million for the full year 2008, which exceeded our 2008 gross cost reduction target of $100 million. Our 2009 gross cost reduction target is a minimum of $150 million.

High Performance Metals Segment

Fourth Quarter Market Conditions

Demand for our titanium alloys was stable from our airframe customers and began to soften for jet engine applications. Demand for our nickel-based alloys and specialty alloys began to soften for jet engine applications and from the oil and gas market and was steady from the electrical energy market. Demand for our exotic alloys was good from the chemical process industry and nuclear energy markets.

Fourth quarter 2008 compared to fourth quarter 2007

Sales were $449.2 million, 12% lower than fourth quarter 2007. Shipments decreased 8% for titanium and titanium alloys, 3% for nickel-based and specialty alloys and 22% for exotic alloys. Average selling prices declined 9% for titanium and titanium alloys and 8% for nickel-based and specialty alloys. Average selling prices for exotic alloys increased 24%. The decline in the average selling price for titanium and titanium-based alloys, and nickel-based and specialty alloys was primarily due to lower raw material indices due to lower raw material costs and a more competitive pricing environment. The increase in average selling prices for exotic alloys was primarily due to increased demand from chemical process industry and nuclear energy markets and higher raw material surcharges.
Segment operating profit was $117.2 million, or 26.1% of sales, a $70.0 million decrease compared to the fourth quarter 2007 primarily due to lower shipments and selling prices for most of our products, which was partially offset by higher selling prices for zirconium products and the net benefits of gross cost reductions. In addition, fourth quarter 2008 operating profit was compressed by rapidly declining raw material costs, primarily titanium and titanium scrap, and nickel and nickel-bearing scrap. This resulted in higher cost material purchased earlier in the year flowing through cost of sales and not matching raw material indices included in the selling prices due to the long manufacturing cycle times of some of our products. This compression was offset by a $40.5 million reduction in the LIFO inventory valuation reserve. The fourth quarter 2007 had a LIFO inventory valuation reserve benefit of $61.4 million, primarily due to lower raw material costs.
Results benefited from $15.7 million of gross cost reductions, bringing the gross cost reductions in this segment for the year to $65.3 million.

Flat-Rolled Products Segment

Fourth Quarter Market Conditions

Demand was steady for our industrial titanium sheet, grain-oriented electrical steel, and nickel-based and specialty alloy products from the oil and gas, and electrical energy markets. Shipments of our standard stainless products were very weak and pricing was more competitive. Shipments of our Precision Rolled Strip^� products were significantly lower due to reduced demand from the electronics, automotive and residential construction markets. Service center inventories of standard stainless products remained low.

Fourth quarter 2008 compared to fourth quarter 2007

Sales were $563.5 million, 14% lower than the fourth quarter 2007, due primarily to lower shipments for most products, lower raw material surcharges and lower base prices. Shipments of standard stainless products decreased 22% and total high-value products shipments decreased 6%. Within high-value products, increased shipments of industrial titanium sheet and nickel-based alloys, and level shipments of grain-oriented electrical steel were offset by a decline in shipments of Precision Rolled Strip^� products. Average transaction prices for all products were 1% higher, primarily due to a better mix of high-value products which offset lower raw material surcharges and more competitive base prices for standard stainless sheet and plate.
Segment operating profit improved slightly to $62.2 million, or 11.0% of sales, an increase of $6.5 million compared to the fourth quarter 2007. Fourth quarter 2008 operating profit was compressed by rapidly declining raw material costs, primarily nickel and nickel bearing scrap, iron scrap, chromium, and molybdenum. This resulted in higher cost material purchased earlier in the year flowing through cost of sales and not matching raw material surcharges included in the selling prices due to the long manufacturing cycle times of some of our products. This compression was more than offset by increased shipments of our flat-rolled titanium and nickel-based alloys products, a decrease in the LIFO inventory valuation reserve, and benefits of gross cost reductions. Declining raw material costs, which affected almost all of the raw materials we use, resulted in a LIFO inventory valuation reserve benefit of $81.1 million in the fourth quarter 2008. The fourth quarter 2007 included a LIFO inventory valuation benefit of $14.1 million, primarily due to lower nickel and nickel-bearing scrap costs.
Results benefited from $11.8 million in gross cost reductions, bringing the 2008 year gross cost reductions in this segment to $59.3 million.

Engineered Products Segment

Fourth Quarter Market Conditions

Demand declined significantly during the quarter for most products. This abrupt decrease in demand was particularly evident for wind turbine components from the electrical energy market and from the transportation market.

Fourth quarter 2008 compared to fourth quarter 2007

Sales were $100.0 million, 7% lower than the fourth quarter 2007.
Results of operations for the segment was a $1.9 million loss, compared to income of $1.5 million for the comparable 2007 period. The decrease in profitability was due to reduced volume, lower selling prices, including raw material surcharges, and $1.8 million of start-up expenses associated with our Alpena, MI casting operation. In addition, a rapid decline in raw material costs resulted in higher cost material purchased earlier in the year flowing through cost of sales and not matching raw material surcharges included in selling prices due to manufacturing cycle times. This compression in profit margins was offset by a LIFO inventory valuation reserve benefit of $11.1 million in the fourth quarter 2008 and gross cost reductions. The fourth quarter 2007 included a LIFO inventory valuation reserve charge of $2.0 million primarily as a result of higher material costs.
Results benefited from $2.9 million of gross cost reductions, bringing the gross cost reductions in this segment for the 2008 year to $9.6 million.

Retirement Benefit Expense

Retirement benefit expense decreased to $2.6 million in the fourth quarter 2008, compared to $7.6 million in the fourth quarter 2007, primarily as a result of higher than expected returns on plan assets in 2007 and the positive benefits of the voluntary pension contributions over the last several years.
For the fourth quarter 2008, retirement benefit expense included in cost of sales was $1.9 million and in selling and administrative expenses was $0.7 million. For the fourth quarter 2007, the amount of retirement benefit expense included in cost of sales was $5.4 million, and the amount included in selling and administrative expenses was $2.2 million.
As previously disclosed, during the 2008 fourth quarter, we made voluntary contributions to our U.S. defined benefit pension plan of $65.2 million, comprised of $30 million in cash and 1.5 million shares of ATI common stock. As of December 31, 2008, our U.S. defined benefit pension plan was approximately 83% funded which represents a decrease in the funding level for this plan from the beginning of the year. This decrease results primarily from a significant decline in the value of investments held by the pension fund due to the negative returns from the equity and fixed income markets in 2008. As a result of the decrease in funding status for our U.S. defined benefit pension plan, we currently expect pension expense of approximately $119 million in 2009, compared to pension income of $12.2 million in 2008. We expect 2009 retirement benefit expense, which includes pension expense and other postretirement benefits expense, of approximately $140 million, compared to $8.4 million of expense in 2008.

Other Expenses

Corporate expenses for the fourth quarter 2008 were $10.3 million, a decrease of $6.6 million compared to the fourth quarter 2007. This decrease was primarily due to lower expenses associated with annual and long-term performance-based incentive compensation programs.
Fourth quarter 2008 interest expense, net of interest income, was $0.7 million compared to net interest income $2.2 million in the year-ago period. The increase in net interest expense was primarily due to less interest income.

Income Taxes

Results for the fourth quarter 2008 included a provision for income taxes of $51.2 million, or 31.6% of income before tax, for U.S. Federal, foreign and state income taxes. The 2008 fourth quarter included a favorable discrete net benefit of $6.7 million primarily associated with state taxes. The fourth quarter 2007 included a provision for income taxes of $73.9 million, or 33.2% of income before tax.

Cash Flow, Working Capital and Debt

Cash on hand was $469.9 million at the end of the fourth quarter 2008, which represents an increase of $197.3 million compared to the balance at September 30, 2008, and a decrease of $153.4 million compared to the balance at December 31, 2007.
Cash flow from operations for the 2008 year was $754.5 million, net of a voluntary $30 million cash contribution to the Company’s U.S. defined benefit pension plan.
Managed working capital was reduced by $214.8 million in 2008 primarily as a result of lower business activity in the fourth quarter and declining raw material costs. The reduction in managed working capital during the 2008 year resulted from a $121.5 million decrease in accounts receivable and a $203.1 million decrease in gross inventories, partially offset by a $109.8 million decrease in accounts payable.
At December 31, 2008, managed working capital was 35.2% of annualized sales, compared to 32.2% of annualized sales at year-end 2007. We define managed working capital as accounts receivable plus gross inventories less accounts payable.
Cash used in investing activities was $513.9 million in the 2008 year and consisted primarily of capital expenditures.
Cash used in financing activities was $394.0 million in the 2008 year primarily due to the repurchase of 6.2 million shares of the Company’s common stock at a cost of $278.3 million, dividend payments of $71.4 million, $27.4 million for taxes on share-based compensation, and a reduction in borrowings of $17.9 million. As of the end of 2008, the Company has repurchased 6.8 million shares of stock for $339.5 million since the share repurchase program was initiated in November 2007.
Net debt as a percentage of total capitalization was 2.0% at the end of 2008. This compares to a negative 4.5% at the end of 2007 as cash on hand exceeded total debt. Total debt to total capital was 20.6% at December 31, 2008, compared to 19.2% at the end of 2007.
There were no borrowings outstanding under ATI’s $400 million unsecured domestic borrowing facility, although approximately $14 million of the facility was utilized for letters of credit.

Allegheny Technologies will conduct a conference call with investors and analysts on January 21, 2009, at 1 p.m. ET to discuss the financial results. The conference call will be broadcast live on www.alleghenytechnologies.com . To access the broadcast, click on “Conference Call”. Replay of the conference call will be available on the Allegheny Technologies website.